| Log on
EN FR NL
 

VMBPIRC - Motion and twilight sensor for ceiling mounting

The VMBPIRC is much more than a motion detector for indoor use. You can simultaneously use motion, twilight and absence detection. The built-in astronomical clock allows the VMBPIRC to operate time-dependently. And on top of that, the module also detects motion for a passage signal or light dependent movement for lighting control.

  • motion detector for indoor use (ceiling type)
  • two motion output channels with programmable timeout
  • two light depending motion output channels with programmable light sensitivity and timeout
  • dark and light output channels with programmable light sensitivity, reaction time and timeout
  • abscence output channel with programmable timeout
  • configuration via VELBUSLINK software (free) and VMBRSUSB USB/RS-232 interface module
  • electronically addressable (up to 250 addresses)
  • firmware upgradeable through the Velbus system
  • also available in mini version: VMBPIRM
  • detection angle: 360°
  • detection distance: max. diameter 8m (at 2.5m height)
  • detection motion speed: 0.6 - 1.5 m/s
  • light sensitivity: 1 - 100 lux
  • required power voltage: 15±3VDC
  • current consumption: 25 mA
  • operating temperature: -20 °C to +40 °C
  • installation height: 2.2 - 4 m
  • dimensions PIR sensor: Ø45 mm
  • dimensions visible part: Ø75 x 15 mm
  • dimensions built-in part: Ø60 x 60 mm
  • weight: ±100 g
  • mounting hole Ø: 63 to 68 mm
  • protocol manuals for developers: available for download at https://github.com/velbus

Manual

PDF-File Mounting instructions
PDF-File User manual
Programmation and configuration of the VMBPIRC

Download

PDF-File Velbus Installation Guide, Part 1: Hardware and Cabling
Everything you need to know about the VELBUS hardware
PDF-File Velbus Installation Guide, Part 2: Programmation
How to program and configure VELBUS modules using the free software VELBUSLINK
EXE-File VelbusLink 10.0.1 (EN/NL/FR) - Latest version
Free Windows program to configure and program a Velbus installation (latest version)
EXE-File VelbusLink 9.86.0.8 (EN/NL/FR) - Previous version
Previous version of VelbusLink

Info Sheets

HTML-File Velbus actions by module (click on an action to see a description)
List of actions per module
Q. How to make a Velbus motion sensor switch the light?
A. A Velbus motion sensor (VMBPIRO, VMBPIRC, VMBPIRM, VMBGP4PIR) has to switch the light on during 3 minutes when motion is detected. How do I program this in Velbuslink? Read more ... (PDF)
Q. How can I make a Velbus motion sensor switch a relay at the second movement within 1 minute (to avoid false alarms)?
A. Read more... (PDF)
Q. How can I disable and enable push buttons and sensor channels at certain times?
A. A light needs to be switched by a PIR sensor from 8:00 until 22:00, and by a push button from 22:00 until 8:00. How do I program this in Velbuslink? Read more... (PDF)
Q. How can I make a motion detector set a light to a certain dim value during a certain time?
A. A Velbus motion sensor needs to turn a light on at a certain dim value (eg. 50%) during a certain time (eg. 1 minute).
This can be done as follows:
- in the configuration of the Velbus motion sensor module, set the timeout of the motion output to 1s
- create an action "Set to percentage" with the motion output channel as initiator and the dimmer channel as subject. Set the dim percentage parameter (in our example 50%). This action has also a "duration" parameter. Set this to the desired on time (in our example 1 minute)
Q. Advanced configuration of a PIR motion sensor, light and ventilation in the toilet
A. The following functionality needs to be programmed:
- a Velbus PIR motion detector switches the light on in the toilet
- 2 minutes after the light goes on, the ventilation has to start
- 3 minutes after the light goes out, the ventilation has to stop
- if the light is off before the 2 minutes have passed, the ventilation has to stay off
Read more... (PDF)