| Log on

VMBVP01F - Doorbird based video phone, flush mounted


Video phone for the Velbus home automation system, based on a Doorbird video phone. Control it on your tablet or smartphone with the Doorbird iOS or Android app. Connect it to the Velbus bus cable and let the door opener, bell button and motion detector trigger any action in your Velbus system.

  • flush mounting
  • stainless steel housing
  • night vision (12 IR leds)
  • illuminated doorbell button (stainless steel) & name plate
  • PÏR motion detector
  • to be connected to Velbus and network (Wifi or cabled)
  • 6 Velbus input channels (bell button, motion detector, ...)
  • power supply through Velbus bus cable
  • iPhone®/iPad® & Android® app
  • the last 12 people who rang are stored in the picture memory (free)
  • cloud recording possible via Doorbird (fees apply)
  • incl. licence for the Velbus server
  • camera: HDTV 720p
  • lens: high-end ultra-wide-angle hemispheric lens 180° horizontal, 90° vertical
  • PIR: 180° / 2 to 8 m range
  • weather protection: IP65
  • operating conditions: -20 to 40 °C / 10 to 85% RH
  • power supply: through Velbus bus cable 15+/-3VDC (required), optionally complemented by PoE (Power over Ethernet)
  • current: 200 mA/15 V stand-by, 300 mA/15 V max.
  • dimensions: 215 x 125 x 55 mm / 8.46 x 4.92 x 2.17 in (H x W x D)
  • recommended installation height: camera lens at min. height of 125cm (49in)


PDF-File Installation Guide
PDF-File Quickstart Guide
PDF-File Mounting instructions


PDF-File Velbus Installation Guide, Part 1: Hardware and Cabling
Everything you need to know about the VELBUS hardware
PDF-File Velbus Installation Guide, Part 2: Programmation
How to program and configure VELBUS modules using the free software VELBUSLINK

Info Sheets

PDF-File Catalog
PDF-File Velbus price example
HTML-File Velbus actions by module (click on an action to see a description)
List of actions per module
Q. How to reset the Wifi setup?
A. If you have connected the VMBVP01 to a Wifi network and wish to delete the Wifi settings, proceed as follows.
Disconnect the power supply (Velbus cable) briefly, and reconnect it.
Wait for the video door station to tell you "Succesfully connected to internet" (this may take up to 2 minutes).
Press and hold the doorbell button during 10 seconds, then release it. Wait until the video door station tells you "Wifi setup enabled".
The existing Wifi settings have now been deleted from the device. You can now follow the Quick start guide for the normal installation procedure.
Q. How to reset the video door station to factory settings?
A. Make sure your video door station is connected by a LAN cable to your network, and that your mobile device (smartphone/tablet) is connected to the same network. Make sure you have access to the administrator's email (as entered in the Doorbird app in Settings > Administration).
Go in the Doorbird app to Settings (gear icon) and select "Reset to factory defaults". Then follow the instructions on the screen.
At the end of the reset procedure, all settings and data will be deleted in the video door station and in the cloud, and a new Digital Pass (with new user and administrator account details) will be sent to the administrator's email address. All existing user and administrator accounts will become permanently invalid.
Q. How to remove access to certain users?
A. If you want to remove access to certain users, you can delete the corresponding user account from the video door station. Go in the Doorbird app to Settings (gear icon) > Administration and log in with the administrator account (administrator name and password can be found on the Digital Passport that was delivered with the video door station).
Tap on the user's name in the list of users, scroll down and tap on "Delete".
CAUTION: once a user is deleted, this combination of user name and password will be permanently invalid and can no longer be recovered. New user accounts can be created by the administrator, but the names and passwords of these will be randomly generated by the app.